Cables
Home Up

 

 

 


Cables and Connectors

A.I.C.D. CABLES are used in conjunction with the implantation of Automatic Implantable Cardioverter Defibrillators, or for pacing.

 MODEL 307L A.I.C.D. CABLES - Model 307L has a cable length of 10 feet.  The cables have standard female pin connectors on one end and "alligator" clips on the opposing end.  Positive (+) pacing wire is marked with Red connector on one end and RED alligator clip on opposing end.  

ADAPTER PIN MODEL 402 - This pin is used on connector posts of older model fibrillators that have not been modified to accept the FDA mandated female connectors. Refer back to section on USE OF MODEL 305 & 306 with older model fibrillators.  Pins should be changed on the older model fibrillators only if damaged.

ONCE ADAPTER PINS HAVE BEEN ATTACHED TO FIBRILLATOR THEY SHOULD REMAIN IN POSITION AND NOT BE REMOVED.

  

STERILIZATION OF PADS & CABLES 

The electrode pads and cables may be ETO* gas sterilized, steam autoclaved**, Gamma Irradiated or sterilized with the newer liquid sterilant concentrates. Exposure times and parameters verified by your sterilization equipment.   

*Pads and cables must be properly aerated.

**Heat may cause electrode separation from silicone pad. PLEASE examine pad/cable very carefully for electrode separation and if separated, however slightly,  is detected, DISCARD IMMEDIATELY!

 

PRODUCT PACKAGING

 

Our products are shipped NON-STERILE; however, the product you receive is in ready-to-sterilize condition.  Use and sterilization instructions are printed on each pouch.

 

 

 SHIPPING

 

To insure timely pick-up and delivery service, with the capability of up-to-the-minute tracking, we use Federal Express´┐Ż exclusively for all our shipping needs.  The following options are offered:  Priority Overnight, Standard Overnight, 2nd Day and Express Saver (3rd Day).  We do not recommend ground services.

PRICE LIST